ECR25D

Description

The Volvo ECR25D compact excavator has been designed with mobility and performance in mind. Featuring a range of innovations engineered for effortless transportation, you'll benefit from an ideal transport weight and an integrated bucket transport system. Achieve more with Volvo.

Features And Benefits
  • SMALL SIZE. BIG POWER.
  • Conveniently transport this highly mobile machine with up to three buckets and a hydraulic breaker on a small trailer and benefit from a total transport weight of less than 3.5 tonnes. Safe transportation is enabled by four, easily accessible, tie-down points.
  • MAINTENANCE MADE EASY
  • It’s easy to keep your hardworking ECR25D up and running with worry-free maintenance. The wide-opening lockable engine hood provides clear access to all daily service points, while the minimum 50-hour interval on all greasing points saves valuable time and money. Check hydraulic oil at a glance with the Volvo patented hydraulic filter, featuring transparent housing to prevent unplanned downtime.
  • CONTROL COSTS
  • Decrease your total cost of ownership with a range of built-in features. The ideally matched Volvo engine and single variable displacement pump reduce fuel consumption, while auto-idle and auto-engine shutdown maximizes fuel efficiency, cut service costs and ensure high resale value. Controlling your costs needn’t be complicated, which is why the flat glass windows of the cab can be replaced easily and inexpensively.
  • THE OPERATOR'S CHOICE
  • As the industry’s leading operator environment, the easily accessible Volvo cab boasts superb visibility, comfortable seat, ergonomic controls, and conveniently-located cup and phone holders. The flat floor makes cleaning quick and easy, while noise and vibration insulation keep the operator fresh and focused – longer.
  • INTUITIVE OPERATION
  • Experience precise, smooth and effortless command of the boom offset and auxiliary hydraulic flows with proportional fingertip controls. The easy-to-use joystick allows you to fine-tune the maximum hydraulic flow of any attachment to ensure ideal speed and power for any task. And, with automatic two-speed travel, you can drive the machine at high speed, which is automatically reduced when more traction is required.

Downloads

Contact Us

Please complete the form below to request information on any of our products or services.

Technical Specification

Technical Specification

Description
Standard Arm Length 3 ft 5.3 in (1050 mm)
Telematics
Telematics Available Yes
Driveline
Engine Manufacturer Volvo
Engine Model D 1.1A
Displacement 68.5 Inches³ (1.123 ltr)
Rated Speed 2400 rpm
Engine Output - Net 20.9 hp (16 kW)
Engine Output - Gross 20.9 hp (15.6 kW)
Number Of Track Rollers - Each Side 3
Track Shoe Width 9.8 inches (250 mm)
Dimensions
Bucket Capacity 0.097 yd³ (0.074 m³)
Bucket Weight 130 lbs (59 kg)
Transport Length Mono Boom 15 ft 1 in (4595 mm)
Max Transport Height 8 ft 4 in (2535 mm)
Max Machine Width 5 ft 1 in (1550 mm)
Track Length On Ground 6 ft 3 in (1900 mm)
Zero Tailswing Yes
Heaped Bucket Capacity 0.097 yd³ (0.074 m³)
Bucket Width - Standard 20 inches (500 mm)
Variable Undercarriage Availability No
Ground Level Reach 14 ft 2 in (4313 mm)
Dig Height 13 ft 4 in (4010 mm)
Dump Height - Mono Boom 9 ft 2 in (2784 mm)
Dig Depth 8 ft 1 in (2461 mm)
Standard Arm 3 ft 5.3 in (1050 mm)
Longest Arm 4 ft 5.1 in (1350 mm)
Capacities
Fuel Tank 7.4 gallons (US) (28 ltr)
Performance
Ground Bearing Pressure 4.5 PSI (30.5 kPa)
Arm Tearout 3993 lbf (17.76 kN)
Bucket Breakout 5020 lbf (22.33 kN)
Main Pump Variable axial piston
Number Of Main Pumps 1
Total Flow 17.7 gallons (US) / min (67 lt/min)
Weights
Operating Weight 5490 lbs (2490 kg)